Home  >  Peripherals  >  Networking  >  Switches  > 

TRENDnet Network TPE-S80 8-Port 10/100 PoE Switch Retail

TRENDnet Network TPE-S80 8-Port 10/100 PoE Switch Retail
In Stock
Was: $225.56
On Sale: $175.50

Item Number: asi102154
The 8-Port 10/100Mbps PoE Switch, model TPE-S80, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.

Boost office efficiency and reduce network congestion with a total switching capacity of 1.6Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use TRENDnet's PoE Splitter with the TPE-S80 to install non-PoE devices in remote locations.


- IEEE 802.3af Power over Ethernet (PoE) compliant

- 8 x 10/100Mbps Auto-MDIX RJ-45 PoE ports

- On/Off power switch

- Provides 15.4 watts per PoE port

- Supports PoE Powered Device (PD) classification

- 1.6Gbps switching fabric

- Full wire-speed non-blocking reception and transmission

- Store-and-forward switching method

- Back pressure Flow Control for half-duplex mode

- IEEE 802.3x Flow Control for full-duplex mode

- 512Kbits RAM Data Buffer and 1K MAC address entries

- Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)

- Plug and Play

- Sturdy metal enclosure

- Mounting hardware included

IEEE 802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE 802.3af Power over Ethernet
IEEE 802.3x Flow Control
8 x 10/100Mbps Auto-MDIX PoE ports
Power Switch
On/Off power switch
Data Transfer Rate
Ethernet: 10/20Mbps (half/full duplex)
Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer
Address Table
1K MAC entries
Switch Fabric
100 to 240VAC 50/60Hz, internal universal switching power
Diagnostic LEDs
Power, Link, Activity, PoE Act, Status
Power Consumption
6 Watts max. (no Power Device (PD) connected)
132 Watts max. (8 x 15.4 watts PoE devices connected)
Operating: 0 to 45C (32 tp 113F)
Storage: -10 to 70C (14 to 158F)
10 - 95 percent (non-condensing)
266 x 160 x 44 mm (10.5 x 6.3 x 1.73 in.)
1.4 kg (3.1 lb)
Power over Ethernet
Up to 15.4 watts per port PD classification
Polymer switch for short protection
PoE: pin 3,6 for power plus and pin 1,2 for power
3 Years